VMware VSAN
VMware VSAN has a number of features to like – some of these include complete integration with vSphere and vCenter, utilization of unused storage capacity on servers, ability to leverage higher local...
View ArticleBypass the Horizon Mirage installer check for .net 3.5
You can bypass the Mirage installer check for .NET 3.5 by creating the following registry key (before running the Mirage installer): HKLM\Software\Microsoft\NET Framework Setup\NDP\v3.5And in that key...
View ArticleSchedule VM snapshot deletion
Requirement: There is no default feature available in Vcenter to schedule snapshot deletion. We need to automate snapshot deletion of VM. Pre-requisite: SSH service should be running on ESXi...
View ArticleView Connection Server 会用到的端口
总结了View Connection Server 会用到的端口：注：针对 Horizon View 5.2 版本 端口View Standard Server View Replica ServerView Security ServerView Transfer Server备注80√√√HTTP443√√√HTTPS4172√√PCOIP4001√√JMS4100√√JMSIR8009√√AJP13
View ArticleClik here to view.
Upgrading VMware Single Sign On 5.5 (SSO5.5) with High Availability
Upgrade VMware Single Sign On 5.5 (SSO5.5) configured with High AvailabilityBelow are the steps followed in my test lab to upgrade SSO5.5.0 to 5.5.0aLab setup:- Two instance of Single Sign On...
View ArticleClik here to view.
vSphereHA と Guest SDK のアプリケーション監視。
vSphere 5.1 までの vSphereHA では基本的に、ESXiとVMで障害が発生した場合は自動的にVMを他のホストで再起動してくれます。 さらにvSphereHAでは、VMで稼働しているゲストOS上の障害を検知することも可能です。ただし、この設定でアプリケーションの障害を検知するためには、サードパーティのソフトウェアか、「VMware Guest...
View ArticleAnnouncing new release of VOVA based on Havana stable!
We are excited to announce the release of new version of VOVA based on Havana stable and several additional improvements. Below are some of the highlights of the releaseSingle Nova compute node can...
View ArticleClik here to view.
SSO OpenLDAP Autenticazione
Open Ldap Configurazione: Name: OpenRSA Primary server URL: ldap://hostname.domain:389 (es.: ldap://openldap.dominio.com:389 - il server openldap può far parte di un dominio AD esistente,...
View ArticleClik here to view.
vSphereHA ＋ Guest SDK で httpd を簡易アプリケーション監視。
前回 vSphereHA ＋ Guest SDK でのアプリケーション監視についてポストしました。vSphereHA と Guest SDK のアプリケーション監視。 今回は、ためしに Guest SDK に含まれるコマンド「vmware-appmonitor」で、Apache HTTP Server （httpd） をアプリケーション監視してみます。ちなみに試したのは、vSphere 5.1...
View ArticleClik here to view.
ESXi 5.x で HDD を SSD に見せかける方法。（esxcli）
最近の vSphere の新機能では、SSD を前提としたものがいくつかあり、たとえば、vSphere 5.5 からの新機能「VSAN（Virtual SAN）」でも SSD を必要とします。 しかし、ちょっと動作検証をしたいときにSSDを用意するのは、結構ハードルが高いと思います。...
View ArticleClik here to view.
vSphere 5.5 の VSAN 試してみました。
vSphere 5.5 から登場した、VSANを試してみました。 ただし、VSANは現在まだテクニカルプレビューという位置づけで、ベータプログラムが実施されています。Virtual SAN Public Beta | VMware VSANを有効化するときは、クラスタで「仮想SAN」をオンにします。 「ストレージへのディスクの追加」は、「自動」にしておくとESXi...
View ArticleClik here to view.
vCenter Web Client Plug-in for OpenStack
Last week right before the start of the OpenStack Summit the Team OpenStack at VMware released a new version of the vSphere OpenStack Virtual Appliance (VOVA) based on the stable Havana release to the...
View ArticleClik here to view.
ネステッドESXi 5.x で VMDKファイルを SSD に見せる方法。
以前にESXi 5.x で 普通のHDD をSSD に見せかける方法をポストしました。ESXi 5.x で HDD を SSD に見せかける方法。（esxcli）しかし下記の記事によれば、ネステッドESXi で なんちゃってSSDをやりたい場合はもっといい方法があるそうです。virtuallyGhettoEmulating an SSD Virtual Disk in a VMware...
View ArticlevSphere SNMP Agent And Net-SNMP Client Configuration with v1/v2c protocol
Configuration of the vSphere SNMP Agent SNMP v1 and v2c authentication is provided using community strings. The vSphere SNMP Agent can be configured either using ESXCLI commands or using vCLI commands....
View ArticleClik here to view.
SNMP Trap Test And Debugging using v1/v2c protocol in vSphere
SNMP Trap Test command Using ESXCLI from a vSphere hostExecute the ‘esxcli system snmp test’ command from the vSphere SNMP Agent. Expected output from the vSphere SNMP Agent after running...
View ArticleClik here to view.
SNMPGet Test And Debugging using v1/v2c protocol in vSphere
SNMPGET Test From SNMP ClientIf you configure the vSPhere SNMP agent for polling, it can listen for and respond to requests from SNMP management client systems, such as GET requests.By default, the...
View ArticleClik here to view.
SNMP Trap Test And Debugging using v3(noAuthnoPriv, authNoPriv, and authPriv)...
1. SNMP v3 TrapThe vSphere SNMP Agent added support for SNMP v3 in the vSphere 5.1 release, offering increased security and improved functionality. SNMP v3 provides stronger security than v1 or v2c,...
View ArticleSNMP Inform test And Debugging using v3(noAuthnoPriv, authNoPriv, and...
SNMPv3 InformAn SNMPv3 inform is a notification that the sender will resend up to 3 times or until the notification is acknowledged by the receiver. Test Configuration Configuration in SNMP Client...
View ArticleClik here to view.
SNMP Inform test And Debugging using v3(noAuthnoPriv, authNoPriv, and...
Please follow 'SNMP Inform test And Debugging using v3(noAuthnoPriv, authNoPriv, and authPriv) protocol in vSphere - Part 1' for SNMP Agent Configuration for v3 inform tests. Expected Result of...
View ArticleClik here to view.
Having issues integrating Orchestrator with the vCenter Web Client?? Try this...
Arrgh, the Frustration of New Products (sometimes )Suggestions to Solve the Problem of a Missing VC WebClient Orchestrator Plugin So, it is just like me to have a fixation on always having the...
View Article